Ken-tron Builds Presence in the Aerospace Market at the Paris Air Show

Posted by & filed under News.

Ken-tron Mfg., Inc. solidified our presence in the aerospace industry through our participation in the Paris Air Show. Ken-tron was proud to participate in this truly international event in conjunction with the Kentucky Aerospace Industry Consortium (KAIC)and the Kentucky Cabinet for Economic Development (CED. The 2019 show, at Le Bourget Parc des Expositions, is the… Read more »

Ken-tron to Exhibit at International Paris Air Show 2019

Posted by & filed under News.

Ken-tron Mfg., Inc. is excited to be exhibiting in The International Paris Air Show, the aviation and space industry’s largest dedicated show.The Show takes place every two years and is organized by the SIAE, a subsidiary of GIFAS, the French Aerospace Industries Association. In 2017 the Show featured 2,381 exhibitors and drew 332,000 attendees. The… Read more »

Ken-tron National Manufacturing Day Celebration Hits a High Note

Posted by & filed under News.

Mayor Tom Watson, center, tries to get everyone to sing along as Chris Joslin, right, and Kristy Westerfield, left, of the Bluegrass Music Hall of Fame & Museum start “My Old Kentucky Home” on Friday at Ken-tron Manufacturing to celebrate National Manufacturing Day. Photo by Alan Warren, Messenger-Inquirer/awarren@messenger-inquirer.com National Manufacturing Day® with music. That is… Read more »

Ken-Tron Featured in News Article

Posted by & filed under News.

  We’re pleased to share with you an article as it recently appeared in the Owensboro Messenger-Inquirer. The article focuses on the 500,000 pounds of Music Wire we produce per year and where all of this wire ends up. But, it also gives a brief history of the company and touches on some of the… Read more »

Medical Industry: Part of the Ken-Tron Family

Posted by & filed under News.

You’ve checked your phone a thousand times. You’ve prayed a thousand more. You’ve talked to those waiting with you about how their family is doing. You’ve looked at all the magazines twice, but time seems to stand still while you wait to hear from the surgeon. You just want good news. We know how you… Read more »

Ken-Tron Serves the Automotive Industry

Posted by & filed under News.

Stopping just in time, swerving just before impact, accelerating just to feel the power, checking the rear view just to make sure you’re still looking good (only when stopped please). Whatever you’re doing in your SUV, car, or truck, Ken-tron could be along for the ride.  Our automotive stampings and automotive drawn wire are in… Read more »

Aerospace Wire: Ken-tron Soars to Meet Sky-High Challenges

Posted by & filed under News.

As you see the contrail rolled out across the sky, you daydream about where that gleaming jet is headed. No matter the destination, Ken-tron is likely on board. Using some of the world’s most exotic metals and our decades of experience, Ken-tron manufactures much of our wire and stampings for the aerospace and defense markets…. Read more »

Music Wire: Instrumental Where Strength is Required

Posted by & filed under News.

If you were playing your guitar today or if you heard a song with someone else playing a guitar, there is a pretty good chance Ken-tron Mfg., Inc. was involved.  Since the early 1980s, Ken-tron has been a major supplier of music string wire, primarily for guitars. Until recently, most of this wire was known… Read more »

Guthrie’s Manufacturing Day Visit Goes Well

Posted by & filed under News.

as reported on 1490womi.com Congressman Guthrie visited Ken-tron Manufacturing yesterday as promised. It occurred on the first national “Manufacturing Day,” as declared by the National Association of Manufacturers. “Having worked at my family’s manufacturing business, I understand the challenges our small business owners are facing today,” said Congressman Guthrie. “I really appreciate Ken-tron allowing me… Read more »

Guthrie Visits Ken-tron Mfg., Inc. on National Manufacturing Day

Posted by & filed under News.

WASHINGTON, D.C. – Congressman Guthrie today visited Ken-tron Mfg., Inc. on the first national “Manufacturing Day,” as declared by the National Association of Manufacturers. “Having worked at my family’s manufacturing business, I understand the challenges our small business owners are facing today,” said Congressman Guthrie. “I really appreciate Ken-tron Mfg., Inc. allowing me to tour… Read more »